Our minimum system requirements article lists the absolute minimum specifications required for Live to function. Underperforming computers may not be able to handle audio processing efficiently and this will increase the likelihood of audio crackles and dropouts. To avoid disk overload take the steps listed in our dedicated article: Avoiding Disk Overload. This is more likely to occur if triggering multiple large audio files at once. In this case the Disk Overload (D symbol) indicator will flash. If the hard disk cannot read or write audio quickly enough, you may hear dropouts. Make sure to close all other programs and processes on your computer which might be using valuable CPU resources. To reduce the CPU load in Live take the steps listed here: Reducing the CPU load in Live. When the CPU load on your computer is too high, you'll probably hear gaps, clicks or other audio problems in Live. Also check the computer's USB port to make sure it's free of dust and lint.Connect directly to the computer and not via a hub. ![]() ![]() Check the connections and replace the cables/adaptors if necessary. If using an audio interface which is connected via USB, Firewire or Thunderbolt, these cables or adaptors can easily cause crackles and dropouts if they have become damaged or are improperly inserted.If in doubt, test using the computer's built in soundcard instead.Make sure that your audio interface is compatible with this protocol. Your computer may have USB 3.0 ports installed.If the interface has been discontinued then you'll need to consider upgrading it. Older interfaces may not have drivers available for your current operating system.Make sure that the audio interface drivers and firmware are completely up to date.Check our dedicated article on Driver Error Compensation. Reset Driver Error Compensationĭriver error compensation set to extreme amounts may cause audio issues. Note: Many ASIO audio interfaces only allow the buffer size to be changed via their own control panels. If there is no native ASIO driver available for your interface, you can use ASIO4ALL.For best performance we recommend using ASIO rather than MME/Direct X as the driver type. ![]() Note: Larger buffer sizes will also increase the audio latency.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |